Specification Sheet - 48"

Available Finishes
BN Brushed Nickel
BL Black
BS Brushed Satin Brass
GR Matte Greige
GZ Galvanized
DF Driftwood
DZ
Dark Bronze
MW Matte White
MA6721B**
Ceiling Fan
SPITFIRE
CUSTOM 48
™
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction
box capable of withstanding a load of at least 35 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz,
15 amp circuit.
MOTOR SPECS:
188 x 25 AC motor is designed for optimal performance with this fan.
BLADE SET:
LOCATION USE:
Fan is rated for dry and damp locations.
3 bladed blade sets are available in wood material — all sold
separately. See our catalog or visit www.fanimation.com for blade
options.
LIGHTING OPTIONS:
LK6721B – One 18 watt dimmable LED.
7.09˝ dia
Blade Sweep = 48˝ dia
A
21° Blade Pitch
MA6721B with BPW6720-48 Net Hanging Weight: 18.88 lbs
Ceiling
Floor
7.85˝ dia
MA6721B with BPW6720-48 / CCK6721
Net Hanging Weight: 20.60 lbs
7' min
21° Blade Pitch
Blade Sweep = 48" dia
Ceiling
Floor
Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 183 5176 83 0.53 63
Med 3426 95 0.41 36
Low
124
62 1461 107 0.25 14
Energy Guide FTC
Power
(Wave)
Total Air Delivery
(CFMave)
Estimated Yearly
Energy Cost ($)
Ceiling Fan
Efficiency
(CFM/W)
41 84
Airflow / Energy Efficiency Info (120V)
3435
$ 11
A
Fan w/4.5˝ downrod 12.00˝
Fan w/12˝ downrod 19.50˝
Fan w/18˝ downrod 25.50˝
Fan w/24˝ downrod 31.50˝
Fan w/36˝ downrod 43.50˝
Fan w/48˝ downrod 55.50˝
Fan w/60˝ downrod 67.50˝
Fan w/72˝ downrod 79.50˝
CONTROL OPTIONS:
TR500 hand-held remote control is included. Push button remote control with
variable fan speeds, infinite light levels and off button. Optional WC1WH, WC2WH,
CWRL4, WR500WH and WR501WH wall controls, BTCR9, CRL4WH hand held
remote controls and BTR9 and WFR50 WiFi receiver
unit are available —sold
separately. Instructions are provided with each control.
DOWNROD OPTIONS:
Fan comes with 1˝ dia. x 4.5˝ long downrod (DR1-4.5). Optional
downrods available in 12˝,18˝, 24˝, 36˝, 48˝, 60˝, and 72˝
lengths. A downrod coupler is available for installations
requiring a downrod longer than 72˝. Fan must use 12˝ or longer
downrod, and can be mounted on a sloped ceiling up to 19°.
Most sloped ceiling in stallations require a downrod longer than
the standard 4.5˝ downrod. Optional close-to-ceiling kit is
available as well—sold separately. Optional sloped ceiling kits
(SCK1-52) are available for up to 42°. Call technical support for
more information.
7' min
9.5"