User's Manual

Bluetooth Low Energy(BLE) 4.2 Module BT832/BT832F
Ver 1.0 Nov. 2
016
16
0:+4
1:+0 defau
lt
2:-4
3:-8
AT_RFP
W=<parm> OK or FAIL +4~-8
AT+RFPW= 1/r/n
OK/r/n
0:+4
1:+0
2:-4
3:-8
AT+PIO=<param><param1> OK or FAIL
P00-P05 AT+PIO=05, 0\r\n
1=High ,0=l
ow
OK/r/n
AT+PI
S=<param><param1>
OK o
r FAIL
P00-P05 AT+PIS=05, 1\r\n
1=outpu
t,
0=input
OK/r/n
Data Mode
When P0.02 o
f nRF52832 (pin 13) of BT832 is pulled low, it is set to data mode. In data model, BT832
provides transparent data transfer between the host processor and a remote device, for example, a
smartphone.
6. BT832 E
valuation Board
C
ommunicating with a PC
A quick and easy way to evaluate BT832 is to use a PC as the host processor. Connect the development
board EV-BT832 to a PC with an USB cable. Then,
 SetS1, BT832 is set to command mode. PC will communicate with BT832.
 Set switch S1 to the other position, BT832 is set to data mode. PC will communicate with a remote device through
BT832 Bluetooth wireless connection.
Docklight is a testing, analysis and simulation tool for serial communication protocols (RS232, RS485/422 and
others). It allows you to monitor the communication between two serial devices or to test the serial
communication of a single device. Docklight significantly increases productivity in a broad range of industries,
including automation and control, communications, automotive, equipment manufacturers, and embedded /