Owner's manual

Nano, Remora and Sea & Sea Strobes FO 20090618
1
Using the Fiber Optic Cable with
Nano, Remora and Sea & Sea Strobes
TheNano,RemoraandSea&Seastrobesarecapableofsynchronizingwiththe
camera'sinternalflashwithoutafiberopticcableinmostdivingconditions.They
featureaslavesensorthattriggersthestrobetofirealongwiththecamera'sinternal
flash,aslongasthestrobeandthecameraarepositionedonthesameaxis.

Thefiberopticcable,however,ensuresthebestsynchronizationbetweenthe
camera'sinternalflashandtheexternalstrobeinallanglesandinvariousdiving
conditions.

Step1‐AttachingtheFiberOpticCabletotheNano,RemoraorSea&SeaStrobe

a) Thefiberopticcableconsistsoftwoends:Oneisattachedtoawhiteplastic
fitting(flatwhiteplasticattheendofthecablewithAllenscrewinside),and
theotherisloose(figureA).
Inserttheexposedendofthefiberopticcable(theendwithoutthefitting)
intothesmallholeoftheadaptorunituntilthefiberopticcablereachesthe
endoftheadaptor.
FigureA
FiberOpticCable