Home Multimedia Center FANTEC HDMI-miniTV User’s Manual
Table of Contents 1. Introduction ................................................................................................ 3 1.1 Preface ................................................................................................ 3 1.2 Packing List ......................................................................................... 3 1.3 Caution ................................................................................................ 3 1.4 Connection ................................
1. Introduction 1.1 Preface Thank you very much for purchasing the product. We hope you will enjoy using it as a great home entertainment partner. The FANTEC HDMI-miniTV has the following functionality. Video Playback - supports AVI, VOB, MPG, DAT, MP4 files with corresponding codec: MPEG-1, MPEG-2, MPEG-4 ASP, XviD (resolution up to D1 quality). Music Playback - supports MP3, WMA (DRM, Pro and Advanced Profile not supported) Photo Playback - supports JPG/JPEG files. - supports slide show mode.
1.3.2 Power The player’s power voltage: DC 5V. When using this player, please connect the supplied AC adapter or AC adapter cable to the player’s power jack. When placing the adapter cable, make sure it can not get damaged or be subject to pressure. To reduce the risk of electric shock, unplug the adapter first before cleaning it. Never connect the adapter to the player in a humid or dusty area. Do not replace the adapter or cable’s wire or connector. 1.3.
1.4 Connection 1.4.1 USB Mass Storage Device (like USB Pen Drive, MP3 player, USB HDD, etc.) (1) Make sure the player is powered on. (2) Plug in the USB Pen Drive or USB HDD or other USB devices to the USB HOST port of this player. 1.4.2 Memory cards Memory cards can be used by inserting to the card slot. (1) Make sure the player is powered on. (2) Insert your memory card (SD/MMC/MS) to the card slot of this player properly. 1.4.3 TV connection 1.4.3.
1.4.3.2 HDMI (1) Follow the picture and plug one connector on your HDMI cable to the player’s HDMI jack. (2) Follow the picture and plug the other connector on your HDMI cable to the TV’s HDMI jack. In this way, you can have the highest quality video and audio via a single cable. 1.4.4 Power connection (1) Follow the picture and connect the AC adaptor to the player’s DC IN jack. (2) Follow the picture and plug in the AC adaptor to the power outlet.
1.5 First Time Usage 1. Power on Plug in the power cord to DC IN jack on the player and the POWER indicator on the front panel will turn blue. 2. Power off In playback mode press the POWER button of the remote control and the player will enter standby mode and the POWER indicator will turn red. 3. Language control The system language of this player can be set to English or other languages. In setup menu, the selected language will take effect immediately. 2. About the Player 2.
No. Button Function 1 POWER Press to power off or enter the standby mode. 2 HOME Press to return to the main interface. 3 DEVICE Press to select the device or partition you wish to browse. 4 TOOL Press to activate / hide tool bar in playback mode. 5 UP Press to move the highlight up when navigating menus. Press to disable the buttons in tool bar while in file list mode.
2.2 Side Panel 1. Card Slot 2. USB HOST port (B-Type) 2.3 Rear Panel 1. A/V OUT jack 2. HDMI jack 3. DC IN jack 3. Setup Menu The Setup Menu allows you to configure video, audio, photo and system settings. Select Setup icon in the main interface to enter this Menu. 3.1 General Setup This section allows you to setup OSD Language and other system settings.
OSD To select and change the system language. It supports English, French, German, Language Italian, Portuguese, Spanish, and Dutch. File Sorting To select and change the file sorting method. The sorting method contains: A to Z, Z to A, Recent date, Oldest date. Auto Start You can turn Auto Start on/off. While Auto Start is set to on, your player will play the media files in your storage device automatically next time when you reconnect your storage device.
3.3 Audio Setup This section allows you to configure the audio settings. Audio Output Select to set Analog, RAW, or PCM Main Page Back to the main setup menu 3.4 Photo Setup This section allows you to configure the photo settings. Thumbnail Digest You can turn Thumbnail Digest on/off Interval Time To set the interval time of photo slide show : 1s, 3s, 5s, or 10 seconds Transition Mode To set the transition effect of photo slide show Main Page Back to the main setup menu 3.
4. Media Playback Main Interface In the main interface, use the direction keys to select and enter different mode. The main interface contains: Photo, Music, Movie, File and Setup. Select the device Select the Device icon on the remote control to enter this menu, then you can select the device or partition you wish to browse.
4.1 Video List Select the Video icon in the main interface to enter this menu, and all of the supported video files stored in the device will be displayed. In video list, press the LEFT button to enable the buttons in the tool bar. Press the UP / DOWN button to select a video file you wish to play, and press the PLAY / PAUSE button to begin the playback.
You can access the following functions during playback: z TOOL: Press to activate or hide the tool bar during playback. z PREV/NEXT: Press to go to previous/next file. z STOP: Press to stop the playback. 4.2 Music List Select the Music icon on the main interface to enter this menu, and all of the supported audio files stored on the device will be displayed. Press the UP / DOWN button to select a music track you wish to play. In music list, press the LEFT button to enable the buttons in the tool bar.
You can access the following functions during playback: z TOOL: Press to activate or hide the tool bar during playback. z PREV/NEXT: Press to go to previous/next file. z STOP: Press to stop the playback. 4.4 Slide Show In photo list or music list press the slide show button in the tool bar to activate the photo slide show with background music. 4.
4.6 DVD Playback DVD files stored on the portable HDD can be played directly on the player. Enter the folder, make sure the cursor stops on the Play DVD folder icon and press the PLAY / PAUSE button on the remote control to begin playback. Press the navigational buttons to select options while navigating the DVD root menu. You can access the following functions during playback: z HOME: Press to return to the root menu during playback. z TOOL: Press to activate/hide the tool bar during playback.
6. Appendixes 6.
Question 4. Why do some supported photo formats, cannot be shown in the photo function? Answer: In the JPEG format there are different modes. The player doesn’t support all the modes.
6.4 Warranty What your warranty does not cover: -Acts of nature, such as fire, static discharge. -Damage from unauthorized repair, alteration or accident. -Damage from misuse or neglect. -A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes. -Loss of customer’s software, firmware, information, or memory data. -Improper handling or installation.
