Submittal Sheet

Specification Sheet
Item #: 411974
Rev Date: 010815
fantech
Fit 120H
Heat Recovery Ventilator
Product #: 44933
Fantech's low profile HRV is ideally suited for condos and apartments
that have no mechanical room and where it must be located over a false
ceiling. The Fit 120H brings a continuous supply of fresh air into a home
while exhausting an equal amount of contaminated air. During winter,
fresh incoming air is tempered by the heat that is transferred from the
outgoing air so you save on energy costs, while during summer, the
incoming air is pre-cooled if the house is equipped with an air cooling
system. The Fit 120H is equipped with automatic defrost mechanisms so
you can use your HRV all year round.
Features
• 5" (125mm) oval duct connections
• Weight: 42 lbs (19 kg) including core
• Compact design, only 10.25" (260 mm) high
• Backward curved RadiCAL blade motors
• Electrostatic filters (washable)
• Aluminum heat recovery core
• Easy Core Guide Channels For Removing Core
• Multiple speed operation
Optional Controls
• ECO-Touch™ (#44929) – Programmable Touch Screen Wall Control
• EDF7 (#44883) – Electronic multi-function dehumidistat
• EDF1 (#40375) – Multi-function control
• RTS5 (#44794) – 20/40/60 minute over-ride
• RTS2 (#40164) – 20 minute over-ride
Specifications
• Duct size – 5" (125 mm) oval
• Voltage/Phase – 120/1
• Power rated – 170 W
• Amp – 1.8 A
• Average airflow – 112 cfm (53 L/s)
@ 0.4" P
s
(100Pa)
Motors
Two (2) factory-balanced motors with backward curved blades. Motors
come with permanently lubricated, sealed ball-bearings to guarantee long
life and maintenance-free operation. Covered by a seven year warranty.
Heat Recovery Core
Aluminum heat recovery core covered by a limited lifetime warranty.
Core dimensions are 12” x 12” (305 x 305 mm) with a 7.7” (195 mm)
depth. Our heat exchangers are designed and manufactured to withstand
extreme temperature variations.
Defrost
A preset defrost sequence is activated at an outdoor air temperature of
23°F (-5°C) and lower. During the defrost sequence, the supply blower
shuts down & the exhaust blower switches into high speed to maximize
the effectiveness of the defrost strategy. The unit then returns to normal
operation, and continues cycle.
Serviceability
Core, filters, motors and drain pan can be easily accessed through a
latched door. Core conveniently slides out on our new easy glide core
guides. 8" (203 mm) of clearance is recommended for removal of core.
Case
24 gauge G90 galvanized steel.
Insulation
Cabinet is insulated with 1” (25 mm) foil-face high density expanded
polystyrene and 0.25" (6 mm) of neoprene on the top of the unit.
Filters
Two (2) washable electrostatic panel type air filters 12.2” (284mm) x 7”
(178 mm) x 0.125” (3mm).
Installation
Unit is typically hung by using installation kit supplied with unit. Mounting
bolts provided on top four (4) corners of unit.
Warranty
Limited lifetime on aluminum core, 7 year on motors, and 5 year on
parts.