Submittal Sheet

ManualsBrandsFantech ManualsHVAC Supplies2SHE Series 10" Shutter Mount Exhaust Fan

Direct Drive Propeller Fans

7” to 36” Shutter Mounted Exhaust Fans

Shutter mounted exhaust fans are widely used for ventilating stores,

offices, factories, shops and farm buildings.

Features and Specifications

• Mounting holes in shutter frame allow for easier installation

• Guards comply with OSHA

regulations

• 7” to 24” diameter fans have aluminum propellers; 30” and 36” fans

have galvanized steel propellers

• Two-speed unit requires No. 2ACC02SW two-speed switch

(sold separately)

• Easy to install, efficient exhaust fans have automatic shutters

• Heavy duty guards have gray polyester coating to resist corrosion

• Totally enclosed, sleeve or ball bearing, 115V, 60 Hz motors

• Shipped completely assembled

Two-Speed Fan Switch (2ACC02SW)

Designed for two-speed fans, this switch mounts easily on a standard 4 x

2” handy box.

• 115V 60 Hz

• DPDT (off center)

• 3/4 HP rating

• For use with Model No. 2SHE24C1H

A B C Full Sones CFM Air Delivery Ship Speed

Model Prop. Square Panel Square Opening Nominal Bearing Load @ 5 Ft. 0.0" 0.125" 0.250" Wt. Controller

No. Dia. (In.) Size (In.) Required (In.) HP RPM Type Amps 0.0" SP SP SP SP (lbs.) Model No.

SPEED CONTROLLABLE

2SHE0721 7 11 1/8 4 15/16 8 1/2 1/30 1725 Sleeve 1.4 4.8 140 — — 9 5ACC03SC

2SHE1021 10 13 1/8 5 3/7

10 1/2 1/30 1585 Sleeve 1.4 6.6 585 285 — 10 5ACC03SC

2SHE1221 12 15 1/8 6 13 1/30 1570 Sleeve 1.4 7.6 800 470 — 12 5ACC03SC

2SHE1621 16 19 1/8 6 13/16 17 1/20 1550 Sleeve 1.5 8.0 1095 720 — 20 5ACC03SC

2SHE1871 18 21 1/8 8 1/2 18 1/2 1/15 1075 Sleeve 1.2 8.4 1860 850 — 23 5ACC03SC

2SHE20B1W 20 23 1/8 10 3/4 21 1/4 1150 Sleeve 4.6 11.3 2830 2255 1235 37 5ACC06SC

2SHE24B1W 24 27 1/8 9 3/4 25 1/4 1150 Ball 3.7 11.7 3240 2485 1110 38 5ACC06SC

SINGLE SPEED

2SHE18B1 18 21 1/8 12 19 1/4 1750 Sleeve 4.4 14.3 2590 2190 1705 31 —

2SHE20B1X

20 23 1/8 11 5/8 21 1/4 1735 Sleeve 4.3 14.4 2955 2450 1960 33 —

2SHE20C1 20 23 1/8 11 5/8 21 1/3 1710 Sleeve 4.9 16.9 3635 3115 2760 36 —

2SHE24B1X 24 27 1/8 10 25 1/4 1150 Sleeve 3.2 10.7 3270 2515 1205 39 —

2SHE24C1G 24 27 1/8 10 1/2 25 1/3 1120 Sleeve 3.6 12.1 3970 3240 1900 47 —

2SHE20B1Y 20 23 1/8 11 1/6 21 1/4 1750 Ball 4.3 14.3 2985 2445 1965 33 —

2SHE30C1 30 33 1/8 13 1/3 31 1/3 850 Ball 4.4 13.5 6075 4195 2150 66 —

2SHE36D1 36 39 /18 13 1/8 37 1/2 850 Ball 5.6 14.7 8225 6480 2935 77 —

TWO SPEED

2SHE24C1H 24 27 1/8 10 1/2 25 1/3 1140/1075 Sleeve 3.7

11.8/11.3 3985/3760 3255/2995 1950/1563

42 5ACC02SC

3”

A Sq.

C Sq.

5-3/4”

3-9/16”

1/4 x 1/2” Slots

Air Flow

(*) Performance certified is for installation type A, Free Inlet, Free Outlet. Speed (RPM) shown is nominal. Performance is based on actual speed of test. Performance ratings include

the effects of guard and shutter.

(**) The sound ratings shown are loudness values in fan sones at 5 ft. (1.5mm) in a hemispherical free field calculated per AMCA Standard 301. Vlaues shown are for Installation

Type A, Free Inlet hemispherical sone levels.

Fantech, Inc. and Systemair

Mfg. Inc. certify that the 7”

to 36” Shutter Mounted

Exhaust Fans shown herein

are licensed to bear the

AMCA Seal. The ratings

shown are based on tests

and procedures performed

in accordance with AMCA

Publication 211 and AMCA

Publication 311 and comply

with the requirements of

the AMCA Certified Ratings

Program.