ATMO Spec Sheet

Specification Sheet
Item #: 463953
Rev Date: 2020-06-08
Fantech's, ATMO 150E is an Energy Recovery Ventilator designed for
higher static pressure applications. The unit brings a continuous supply
of fresh air into a home while exhausting an equal amount of
contaminated air. The energy recovery core at the center of the unit
transfers heat and moisture from incoming air to the outgoing air that
was cooled and dried by the building's air conditioner.
Features
• Compact design
• Fans with backward curved blade
• Electrostatic filters (washable)
• ERV core transfers both heat and humidity
• Anti-microbial material
• Withstands freezing
• AHRI certified
• Removable screw terminal for easy connection with external access
• Lighweight 48 lbs (21Kg)
• Multiple speed operation
Optional Controls
• ECO-Touch™
– Programmable Touch Screen Wall Control
• ECO-Feel™
– Automatic IAQ Control
• EDF7
– Electronic multi-function dehumidistat
• EDF1
– Multi-function control
• RTS-W – Wireless 20/40/60 minute timer
• RTS5
– 20/40/60 minute over-ride
• RTS2 – 20 minute over-ride
• MDEH1 – Dehumidistat
Specifications
• Duct size – 6" (152 mm)
• Voltage/Phase – 120/1
• Power rated – 168 W
• Amp – 1.4 A
• Average airflow – 160 cfm (76 L/s)
@ 0.4" P
s
(100Pa)
Fans
Two (2) factory-balanced fans with backward curved blades. Motors come
with permanently lubricated, sealed ball-bearings to guarantee long life
and maintenance-free operation.
Energy Recovery Core
Energy recovery core made from water vapor transport durable polymer
membrane that is highly permeable to humidity. The ERV core is freeze
tolerant and water washable. Core dimensions are 12" x 12" (305 x
305mm) with a 10" (254mm) depth.
Defrost
A preset defrost sequence is activated at an outdoor air temperature of
14°F (-10°C) and lower. During the defrost sequence, the supply blower
shuts down & the exhaust blower switches into high speed to maximize
the effectiveness of the defrost strategy. The unit then returns to normal
operation, and continues cycle.
Serviceability
Core, filters, fans and drain pan can be easily accessed through latched
door. Core conveniently slides out on our new easy glide core guides. 17"
(432 mm) of clearance is recommended for removal of core.
Case
22 gauge galvanized steel corrosion resistant.
Insulation
Cabinet is fully insulated with 3/4” (19mm) high density expanded
polystyrene.
Filters
Two (2) washable electrostatic panel type air filters 10" (254mm) x 11.9"
(302mm) x 0.125" 93mm).
Controls
External three (3) position (Low/Stand By/Medium) rocker switch that will
offer continuous ventilation. Fantech offers a variety of external controls.
(see controls)
Installation
Unit is typically hung by using installation kit supplied with unit. Mount-
ing chains inserted on hooks located on top four (4) corners of unit. An
optional wall bracket is available.
Warranty
5 year on core, 7 year on motors, and 5 year on parts.
ATMO 150E
Fresh Air Appliance (Energy Recovery Ventilator)
Product #: 463890
™