ATMO Install and Operation Manual

AUXILIARY CONTROL –These controls can be paired with central controls or combined together.

*Maintain polarity between control and FAA

(+ → + ; - → -)

RTS SERIES FEATURES CONNECTS TO

• Wireless timer

• Can only be paired with the ECO-Touch

IAQ

• 20/40/60 minute timer with LED light

• Boosts system to high speed with the touch of a button

• Up to 5 can be used in one system

• Use in bathroom, kitchen, laundry room

Connects wireleslly to the

RTS2*

• 20- minute timer with LED light

• Boosts system to high speed with the touch of a button

• Up to 5 can be used in one system

• Use in bathroom, kitchen, laundry room

-T

RTS5* • 20/40/60 minute timer with LED light

• Boosts system to high speed with the touch of a button

• Up to 5 can be used in one system

• Use in bathroom, kitchen, laundry room

WALL CONTROLS (CONT'D)

MDEH SERIES FEATURES CONNECT TO

MDEH1 • Rotary dial Dehumidistat

• Multiple units can be used

• We recommend setting the relative humidity above 80% during the summer

EDF SERIES FEATURES CONNECTS TO

EDF7

• MODE button provides 3 modes of operations: Ventilation , Recirculation and Standby

• User selected fan speed: Reduced, Medium, Normal and 20 minutes per hour

• AUTO setting allows the homeowner to deactivate the dehumidistat

• When the humidity exceeds the desired setpoint, the ventilation system operates at normal speed

• Once the desired humidity level is achieved, your ventilation system resumes to its previous mode of

operation.

EDF1 • Press button once for continuous Reduced speed

• Press button twice and the unit will cycle 20 minutes ON/ 40 minutes OFF and repeat

• EDF1 – Press button a third time and the system will run continuously on HIGH speed