Laundry Ventilation Solutions Brochure

fantech
10
|
Laundries
1
/
3
"
2
1
/
3
"
1
/
3
"
D
DBLT 4W
Lint Trap for Dryer Exhaust Fans
Galvanized metal lint trap for dryer exhausting
applications. Use when duct length between
dryer and exhaust fan is less than 15 feet. Fits
4-inch duct and 2”x6” constructions. Features
pull out white door with a view window with
attached removable lint filter for easy cleaning and 1/2” flange for flush
mount installation. The lint trap complements all Fantech dryer exhaust fans.
Specification Data
Model Duct Size,
inch
Accessability Weight,
lbs
UPC #
DBLT 4W 4 Door 4 12004 7
NEW
DB 10
Pressure Switch
Automatic pressure switch allows for
fully automatic operation of dryer exhaust
fan. Fan runs for 10 minutes when positive
pressure is sensed in the duct line then
shuts off and turns on again as needed.
The switch is used with DBF 4XL, DBF 110
and RVF 4XL.
Specification Data
Model Voltage,
V
Max Current, A Weight,
lbs
UPC #
DB 10 115 2 1 12010 2
FC
Fast Clamps
Our Fast Clamps facilitate the installation and
removal of fans for service and cleaning. Made
from galvanized sheet steel and fitted with an
1
/
3
” neoprene lining, which suppresses vibration
and ensures a tight fit. The mounting clamps are
fastened together by two screws, which allow for
connecting ducts with a marginal difference in diameter. Sold in pairs.
Model øD Neoprene
lining, inch
Weight,
lbs
UPC #
FC 4 4
1
/
3
1 51040 4
FC 5 5
1
/
3
1 51050 3
Dimensions
Accessories
for Dryer Exhaust Fans
Specification Data
Dimensional information is in inches.