Product Overview
Table Of Contents
DBF 110 Dryer Exhaust Fan
Item Number: 95900
Variant: 120V 1~ 60Hz
DBF 110 is a dryer exhaust fan. It helps your dryer run efficiently while
removing the warm and moist air from the dryer duct.
The fan should be added in the dryer duct run when the length of the run
exceeds 40 feet with no bends, 35 feet with one bend or 30 feet with two
bends. The fan can be used to effectively maintain dryer exhaust in duct runs
up to 108 linear feet.
The DBF 110 features a plastic leak proof housing and a pressure switch that
automatically activates the exhaust fan once the dryer is on.
Performance certified by HVI; safety certified by ETL to UL507.
Some helpful tips to take into account while installing the dryer exhaust fan
DBF 110:
• Avoid using rigid PVC pipes or flexible ducts. Use only steel or aluminium
ducts rated for dryer use. These ducts have smooth walls, so lint is less likely
to build up.
• If you are running your dryer duct through an unconditioned space, make
sure you wrap it in insulation. If the duct stays warm, it will be less likely to form
condensation and collect lint.
• To avoid clogging lint over the exhaust fan impeller, install a secondary lint
trap DBLT 4W. It filters the air, catches the lint and protects the fan and
ductwork. The less lint accumulation, the better your dryer performs.
Item name: DBF 110 Dryer Exhaust Fan | Item Number: 95900 | Variant: 120V 1~ 60Hz) | Document type: Product card | Date: 2020-01-07 | Generated by: fantech Online
Catalogue | Language: English
Page 1 of 7