FKD Installation Manual

ManualsBrandsFantech ManualsFKD Series Inline Round Mixed Flow Centrifugal FansFDK Series Round Inline Mixed Flow Centrifugal Fan, 20" Duct, 230-460V (6,291 CFM)

Installation and Maintenance Manual

Manuel pour l'Installation et l'Entretien

Manual de Instalación y Mantenimiento

FKD..EC Series / Série / Serie

Inline Centrifugal Fans • Ventilateurs Centrifuge en ligne

Ventiladores para Conductos Circulares

Item #: 483804

Rev Date: 2019-10-10

Fantech Inc. certies that the

FKD Series shown herein is

licensed to bear the AMCA

Seal. The ratings shown are

based on tests and procedures

performed in accordance with

AMCA Publication 211 and

AMCA Publication 311 and

comply with the requirements

of the AMCA Certied Ratings

Program.

United States Tel.: 800 747 1762

Canada Tel.: 800 565 3548

Latinoamérica Tel.: +52 55 1328 7328

PARTS IN THE BOX

Inline Fan FKD EC, 1 pc

Electrical Box Hardware, 1 pc

Operation and Installation Manual, 1 pc

PIÈCES DANS LA BOÎTE

Ventilateur en ligne FKD EC, 1 pc

Matériel de boîte électrique, 1 pc

Manuel d'installation, 1 pc

PARTES EN LA CAJA

Ventilador para conducto circular FKD EC, 1 pc

Herrajes para caja electrica, 1 pc

Manual de Instalación, 1 pc

registration.fantech.app

INCREASE YOUR PRODUCT

WARRANTY BY AN EXTRA YEAR

* in USA only

Summary of content (12 pages)

PAGE 1
Installation and Maintenance Manual Manuel pour l'Installation et l'Entretien Manual de Instalación y Mantenimiento Item #: 483804 Rev Date: 2019-10-10 FKD..
PAGE 2
Note Warning / Important note Before installation, servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel. 1. The compactness and adaptability of the FKD..EC Series fans permit easy installation. The fans are shipped fully assembled and can be mounted at any angle.
PAGE 3
WARNINGS AVERTISSEMENTS ADVERTENCIAS DO NOT CONNECT POWER SUPPLY until fan is completely installed. Make sure electrical service to the fan is in the locked “OFF” position. NE PAS BRANCHER l’électricité jusqu’à ce que le ventilateur soit complètement installé. Veillez à ce que le tableau électrique du ventilateur soit verrouillé (“OFF”). 1. All fans are suitable for use with a 0-10V external signal NO CONECTE LA ALIMENTACION hasta tanto el ventilador quede completamente instalado.
PAGE 4
MOUNTING ILLUSTRATION 1 Detail Vibratio n Mount ILLUSTRATION POUR L'INSTALLATION 1 Detail Support Vibratiode n vibration Mount INSTALACION 1 Detalle Detail Mensaula Vibratio n amortig Mount uada Please follow all applicable codes when installing this unit 1. Equipment should be hung at its proper elevation by using temporary fixtures that can be removed after vibration hangers are installed. (Vibration isolation mounts provided by others) 2.
PAGE 5
MOUNTING ILLUSTRATION 2 Please follow all applicable codes when installing this unit 1. Install wood supports to structure for fan mounting. 2. If equipping with vibration mounts, attach to supports. 3. Attach fan to vibration mounts, supplied by others (be sure not to over tighten the neoprene element). 4. If equipping fan with isolators (FC Clamps), they should be attached at this time. 5. See wiring section to complete installation.
PAGE 6
MOUNTING ILLUSTRATION 3 Fan Fan Bracket Bracket Mountin Mountingg Bracket Bracket Vibrbation Vibration Mounts Mounts Please follow all applicable codes when installing this unit 1. Create/Install angle wood supports to structure for fan mounting. 2. If equipping with vibration mounts, attach to supports. 3. Attach fan to vibration mounts, supplied by others (be sure not to overtighten the neoprene element). 4. If equipping fan with isolators (FC Clamps), they should be attached at this time. 5.
PAGE 7
DIMENSIONS / DIMENSIONS / DIMENSIONES FKD 12XL-EC, FKD 14XL-EC, FKD 16-EC, FKD 16XL-EC, FKD 18-EC and / et / y FKD 20-EC H E A C B A2 A1 E G F D Model / Modèle / Modelo A A1 A2 B C D E F G H Weight / Poids / Paso FKD 12XL-EC 12 12 14 201/4 177/8 187/8 7/ 8 4 83/4 3/ 8 38 FKD 14XL-EC 14 14 16 221/8 193/4 201/4 1 1/2 4 8 3/4 3/ 8 45 193/ 183/ 1 1/ 4 71/ 3/ 221/8 233/4 1 1/4 77/8 81/2 8 1/ 2 75 FKD 16-EC 16 14 16 221/ FKD 16XL-EC 16 16 18 243
PAGE 8
Single Phase Fans / Ventilateurs monophasés / Ventiladores Monofásicos FKD 16-EC Terminals #11 & #14: External fault Indicator (250Vac, 2A max). Terminals GND, E1, & 10V: Control terminals, Factory installed 0-10V potentiometer. Terminals D1 & 24V: Electronic ON/OFF control via floating contact. Factory installed jumper wire. Three Phase Fans / Ventilateurs triphasés / Ventiladores Trifásicos FKD 16XL-EC, FKD 18-EC, FKD 20-EC Bornes #11 & #14: Indicateur de défaut externe (250V, 2A max).
PAGE 9
WARRANTY Three (3) Year Warranty This warranty supersedes all prior warranties DURING ENTIRE WARRANTY PERIOD: Fantech will repair or replace any part which has a factory defect in workmanship or material. Product may need to be returned to the Fantech factory, together with a copy of the bill of sale and identified with RMA number. FOR FACTORY RETURN YOU MUST: • Have a Return Materials Authorization (RMA) number. This may be obtained by calling Fantech either in the USA at 1.800.747.
PAGE 10
GARANTIE Garantie de 3 ans Cette garantie remplace toutes les garanties précédentes. DURANT TOUTE LA PÉRIODE DE GARANTIE: Fantech s'engage à réparer ou à remplacer toute pièce présentant un défaut d'usine en matière de qualité d'exécution ou de matériau. Il sera peut être nécessaire de retourner le produit à l'usine Fantech, accompagné d'une copie du contrat de vente et du numéro d'autorisation de retour.
PAGE 11
GARANTIA Garantia de Tres (3) Años Esta garantia de sin efecto cualquier otra garantia anterior DURANTE EL PERÍODO INTEGRO DE LA GARANTÍA: Fantech reparará o reemplazará toda parte que presente un defecto en el material o en la mano de obra. Es posible que el producto deba ser devuelto a la fabrica Fantech, juntamente con una copia de la constancia de compraventa e identificado con el número de RMA. PARA DEVOLUCIÓN A FÁBRICA USTED DEBE: • Tener un número de Autorización de Devolución de Material (RMA).
PAGE 12
Fantech reserves the right to make technical changes. For updated documentation please refer to www.fantech.net Fantech® Fantech se réserve le droit de faire des changements techniques. Pour de la documentation à jour, s'il vous plaît se référer au www.fantech.net Fantech se reserva el derecho de hacer modificaciones técnicas en cualquier momento. Para obtener la documentación actualizada, por favor consulte www.fantech.