Submittal Sheet
Specification Sheet
FLEX
®
100H
Heat Recovery Ventilator
Product #: 463333
As Fantech’s masterpiece of versatility, features and efficiency, the
FLEX 100H is ideal for high-rise apartment applications, condominiums,
single and multi family homes. With its compact top port design
featuring 5 inch oval collars and the included EZ-Mount wall bracket, the
FLEX 100H can be installed in spaces as small as 24 inches, such as a
closet or maintenance room.
Unlike traditional HRVs that require excessive power to meet
supplemental ventilation needs, the compact, yet powerful FLEX 100H
allows for sizing based entirely on principal ventilation requirements.
With its exclusive TurboTouch feature, the FLEX 100H can deliver up to
50% more exhaust capacity to easily meet supplemental ventilation
needs whenever additional airflow is required.
Features
• TurboTouch function boosts exhaust capacity by up to 50%
• 5” (125mm) oval duct connections with integrated airflow
measurement
• Removable screw terminal for easy connection
• Lightweight: only 39 lbs (17.7 kg) including core
• Super compact size
• Top port design fits in tight spaces
• Includes EZ-Mount wall bracket
• Aluminum heat recovery core
• Multiple speed operation
• Internal recirculation defrost
Optional Controls:
• ECO-TOUCH
IAQ
– Programmable Touch Screen Wall Control
• ECO-Feel – Automatic IAQ Control
• EDF7 – Electronic multi-function dehumidistat
• RTS-W – Wireless 20/40/60 minute timer
• RTS2 – 20 minute timer over-ride
• RTS5 – 20/40/60 minute timer
• MDEH1 – Dehumidistat
Specications
• Duct size – 5˝ (125mm) oval
• Voltage/Phase – 120/1
• Power rated – 168 W
• Amp – 1.4 A
• Average airflow – 104 cfm (49 L/s)
@ 0.4” P
s
(100Pa)
Fans
Two (2) factory-balanced fans with backward curved blades. Motors come
with permanently lubricated, sealed ball-bearings to guarantee long life
and maintenance-free operation.
Heat Recovery Core
Aluminum heat recovery core covered by a limited lifetime warranty. Core
dimensions are 8.5” x 8.5” (216 x 216 mm) with a 12” (305 mm) depth.
Our heat exchangers are designed and manufactured to withstand
extreme temperature variations.
Winterguard™ Defrost
The FLEX 100H incorporates a unique and quiet internal recirculation
defrost that does not depressurize the home during the defrost cycle. A
preset defrost sequence is activated when the outdoor temperature falls
below 23° F (-5° C) and automatically adjusts itself based on operating
conditions. The fan speed is also adjusted automatically to provide a
smooth and quiet transition between Ventilation & Defrost mode.
Serviceability
Core, filters, fans and electronic panel can be accesses easily from the
access panel. Core conveniently slides out with only 14” (356 mm)
clearance.
Duct Connections
5” (125mm) Oval plastic duct connections with integrated balancing
damper and airflow measurement ports.
Case
24 gauge
galvanized pre-painted steel corrosion resistant
Insulation
Cabinet is fully insulated with 1” (25 mm) high density expanded
polystyrene.
Filters
Two (2) washable electrostatic panel type air filters 8.5” (216mm) x
12.5” (318 mm) x 0.125” (3mm).
Drain
1/2” (13mm) OD (outside diameter) drain spout provided, entire bottom
of unit covered by drain pan.
Warranty
Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.
Item #: 428472
Rev Date: 2021-01-12