Product Overview

Specification
Fans
Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and
maintenance-free operation.
Heat Recovery Core
Counterflow heat recovery exchanger built from thermoformed polymer plates covered by a limited lifetime warranty. Core dimensions are 14.4" x 14.4" (366 x
366 mm) with a 14" (355 mm) depth. Our heat exchangers are designed and manufactured to withstand extreme temperature variations.
Defrost
The unit incorporates a unique and quiet internal recirculation defrost that does not depressurize the home during the defrost cycle. A preset defrost sequence
is activated when the outdoor temperature falls below 23° F (-5° C) and automatically adjusts itself based on operating conditions. The fan speed is also
adjusted automatically to provide a smooth and quiet transition between Ventilation & Defrost mode.
Serviceability
Core, filters, fans and electronic panel can be accesses easily from the access panel. Core conveniently slides out with only 16" (406 mm) clearance.
Duct Connections
6" (152mm) round metal duct connections with rubberrized seal.
Case
24 gauge galvanized pre-painted steel corrosion resistant
Insulation
Cabinet is fully insulated with 3/4" (20 mm) high density expanded polystyrene.
Filters
Two (2) washable electrostatic panel type air filters 7.87" (200mm) x 13.77" (350mm) x 0.125" (3mm). An added MERV-8 supply filter is supplied with the unit.
MERV-8 dimensions 5.77" x 14.06" x 1.75" (146.5mm x 357mm x 44.5mm)
Warranty
Limited lifetime on counterflow exchanger, 7 year on motors, and 5 year on parts.
Requirements and Standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
• Technical data was obtained from published results of test relating to CSA C439 Standards
• HVI certified and ENERGY STAR® qualified*
*This product earned the ENERGY STAR® by meeting strict efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY
STAR® requirements only when used in Canada.
Item name: HERO 200H Fresh Air Appliance | Item Number: 99402 | Variant: 120V 1~ 60Hz) | Document type: Product card | Date: 2020-06-02 | Generated by: fantech
Online Catalogue | Language: English
Page 6 of 6