Spec Sheet

Document type: Product card
Document date: 2019-06-07
Generated by: Systemair Online Catalogue
IPHS5 HUMIDITY / FAN CONTROL
Item no. 156040
Description
IPHS5 Humidity Sensor and Fan Control automatically detects excess humidity in a
room and activates the ventilation fan or fan with light to lessen condensation which
helps reduce mold and mildew.
Application
Contemporary in design, IPHS5 is the ideal solution for controlling ventilation in
areas of high humidity, dampness or rooms prone to condensation and mildew such
as bathrooms, home spa, basements or laundry rooms.
The sensor also helps reduce energy usage by automatically operating the fan only
when needed to control excess humidity.
The IPHS5 is compatible with bath fans rated at 120W and fan/light combinations
with single switched load.
The sensor can replace a single pole switch and can be used with most bathroom or
ventilation fans or fan/light combinations. It is designed to fit within a standard
wallbox and requires a neutral wire for operation. Wallplate/Faceplate is not
included.
Features
The sensor features user-friendly controls to adjust sensitivity, humidity level and
time-out settings.
Gerneral Operation
Automatic humidity control mode: The sensor will automatically turn the fan ON
upon detecting excess humidity. The sensor will continue to monitor the ambient air
and automatically turn the fan OFF when the humidity level has dropped.
Manual operation: For immediate ventilation needs, the user can manually switch the fan ON or OFF by pressing the fan icon. The fan will run for 10
minutes and automatically turn OFF (time out period can be adjusted). If humidity levels change, the sensor will shift into automatic mode and time
out accordingly.
Air Cycle Mode: The Air Cycle mode automatically turns ON a ventilation fan for a set period of time and repeats the cycle hourly. (eg. 20 minutes
ON/40 minutes OFF each hour). The Air Cycle settings can be overridden manually by pressing the fan ON button. This feature may be used in areas
requiring periodic ventilation on a continuous basis such as basements or public restrooms.
Technical parameters
Nominal data
Weight 0,992 lbs.
Voltage 120 V
Current 1 A
Wiring
IPHS5_wiring_diagram.pdf (411,75kB)
Name: IPHS5 HUMIDITY / FAN CONTROL | Item no.: 156040
Document type: Product card | Document date: 2019-06-07 | Generated by: Online catalogue
1 / 2