Engineering Data
Fantech RE(C) Series
RE(C) 54
Sound Data
Volts
Nom.
RPM
SP
The sound power level ratings shown are in decibels, referred to 10
-12
watts calculated per AMCA Standard 301. Values shown are for inlet Lwi and LwiA sound
power levels for installation type A: free inlet, free outlet. Ratings do not include the effect of duct end correction.
† The sound ratings shown are loudness values in fan sones at 5ft. (1.5m) in hemispherical free field calculated per AMCA Standard 301. Values shown are for
installation Type A: free inlet hemispherical fan sone levels.
**dB(A) levels are not licensed by AMCA International.
Note: The A-weighted sound ratings shown have been calculated per AMCA Internation Standard 301.
L
WI
dB(A)
**
†
Sones
Fantech, Inc. and
Systemair Inc. certify that
the RE(C) Series shown
herein is licensed to bear
the AMCA Seal. The rat-
ings shown are based on
tests and procedures
performed in accordance
with AMCA Publication
211 and AMCA
Publication 311 and com-
ply with the requirements
of the AMCA Certified
Ratings Program.
115
3050
Speed (RPM) shown in nominal. Performance is based on actual speed of test. Performance ratings do not include the effects of
appurtenances (accessories). Performance certified is for installation Type A: Free inlet, Free outlet.
Note: Electrical specifications reflect voltage/phase/cycles for stock delivery motor/fans sets. Please consult factory for electrical
specifications and delivery on alternative motor voltages.
Sound Power re 10
-12
Watts
0.0" .125" .25" .375" .50" .75" 1.0"
115 3040 19 0.18 116 105 92 79 65 36 1
Volts
Nom.
RPM
Max.
Watts
Max.
Amps
Air Performance Data
Static Pressure in Inches W.G.
63 125 250 500 1000 2000 4000 8000
0.000 58 59 56 56 63 58 43 32 65 5.8
0.125 57 60 56 55 58 54 42 31 61 4.7
0.250 57 62 57 54 53 51 41 31 58 4.1
0.375 56 61 55 52 50 49 38 30 55 3.5
0.500 56 60 54 51 47 47 37 30 54 3.5
0.750 56 57 53 49 45 45 40 35 52 3.0
Octave Bands, Hz
0
0.2
0.4
0.6
0.8
1
1.2
0 15 30 45 60 75 90 105 120
Static Pressure (in. WG)
Flow Rate (CFM)
10
15
/16
"
Unit
Specifications:
Housing Metal
Thickness -
22 gauge
Base Metal Thickness -
18 gauge
Approximate
Weight - 8 lbs.
Nominal Hp -
0.02 Hp
Tip Speed (fpm) =
RPM x 1.37
All dimensions in inches.
"h" dimension is 1
1
/2
" on model REC only.
Ships with 5" to 4" reducer.
5"
15
1
/2
"
h"
6"
Side View
For Speed Control Options call Fantech Technical Support 1.800.747.1762