Specification

Document type: Product card
Document date: 2018-12-05
Generated by: Systemair Online Catalogue
RN2 INLINE RADON FAN
Item no. 89052
Description
UV resistant, UL Listed durable plastic
UL Listed for use in commercial applications
Watertight electrical terminal box
Totally enclosed for protection
Automatic reset thermal overload protection
Application
The Rn2 is the standard for Radon Mitigation. Ideally tailored performance curve for
a vast majority of your mitigations.
How it works
Active radon mitigation systems employ specialized fans to exhaust radon gas from
underneath building structures via a sealed pipe system. These systems are designed
to remove radon gas before it migrates to a building's interior.
Design
The fan features a fully sealed plastic housing. The housing is joined via a vibration
welding process. The process uses transverse, reciprocating motion under pressure at
the point of contact between the housing’s inlet and outlet pieces. The friction
produces heat that melts the thermoplastic material at the interface. The melted
material quickly re-solidifies, resulting in a fused, single piece housing. The fused
seam is inherently air tight, very strong and permanent.
No screws or adhesive is used to join the housing pieces. An air-tight fan ensures that
efficiency is not lost and contaminants are not spilled due to leakage.
A large electrical wiring enclosure is designed into the fan housing, making electrical installation easier. Thermal overload protected with automatic
reset.
Technical parameters
Nominal data
Voltage 120 V
Frequency 60 Hz
Phase 1 ~
Input power (P1) 67 W
Current 0,58 A
Max. airflow 220 cfm
Fan impeller speed 2894 r.p.m.
Weight 4,85 lbs.
Temperature data
Max. temperature of transported air 140 °F
Name: RN2 INLINE RADON FAN | Item no.: 89052
Document type: Product card | Document date: 2018-12-05 | Generated by: Online catalogue
1 / 3