SHR 1504 Brochure

Whole House HEPA
Fantech provides an added solution
for better indoor air quality with
the Whole House HEPA filtration
unit. This small, compact unit
installs on the existing ductwork of
your furnace/air handler or can be
used as an independent system
mounted in the attic, crawl space
or closet.
It is designed to clean and filter the
total volume of air in an average 2200
sq. ft. house once an hour. Larger
homes will take slightly longer for
complete air change. Mold spores,
pet dander, cooking odors, dust, dust
mites and their by-products are all
captured in a series of three filters.
The prefilter collects the largest particles
while the carbon filter absorbs odors.
The third filter is a true, certified HEPA
filter which collects particles down to
0.3 microns.
Filtration
Accessories
CG4
Contour Grille
Adjustable plastic Supply/Exhaust Grilles with
metal mounting collar. Coanda effect disperses
air along surfaces to eliminate cold drafts.
Paintable. Also available: CG6 for 6" duct.
COM6P
Outdoor Weather Hoods
Includes one fixed louver hood for supply
and one gravity louver hood for exhaust.
White plastic. 6" duct. Also available:
COM4P for 4" duct.
FEL4
Mounting Collar/Elbow 90˚
Heavy-duty plastic. Low depth profile allows
for easy installation in 2x4 sidewall partitions.
Features 1/2" drywall lip.
DM3000P
Building sciences research has shown that highly efficient filtration
of the outside air before it is delivered to the home is one of the best
ways to reduce the level of particles suspended in your home air
.
Three models to choose from:
DM3000P – Duct mount model features integrated airflow
sensor switch which energizes the unit any time furnace/air
handler operates. Designed with a backplate that allows
direct connection of the unit to air handler or furnace.
CM3000 – Collar mount model comes with four collars,
two pieces of UL Listed 8" flex duct and hanging chains.
CM3000I – Insulated unit is used in unconditioned spaces
such as attics and garages. Insulated outer shell prevents
condensation problems. Kit includes hanging chains.
Prefilter Carbon Filter HEPA filter
I
nstallation is Easy!
10
FB6 Inline Filter Box
The simple addition of a Fantech Inline
Filter Box adds even more filtration to
your home’s IAQ system.
Installs in ductwork after HRV or inline
fan as an additional filter for incoming air.
Includes MERV 12 filter.
• 10” (250mm) depth x 8” (200mm) height
x 20-1/2” (525mm) length
• 22-gauge galvanized steel with baked
powder coat finish
LIVING ROOM BEDROOM
CM3000I
99.97%
Effective
At removing particles down to
0.3 microns and larger
MERV 12