PRESSURE WASHER OWNER'S MANUAL Model VPW44H 120V., 60 Hz., 12 Amps. FANTOM 94 Main Mill Street, Door 16 Plattsburgh, NY 12901 Tel.
SAFETY & WARNING INSTRUCTIONS For safety reasons, it is recommended that you read this manual before attempting to operate this appliance. Failure to follow these instructions can result in personal injury or equipment problems. To help recognize note the following symbols: 10. Do not overreach or stand on unstable support. Keep good footing and balance at all times. 11. Follow maintenance instructions specified in this manual. 12.
SAFETY & WARNING INSTRUCTIONS TROUBLE SHOOTING PROBLEM PRESSURE WASHER WILL NOT START WHEN THE ON/OFF SWITCH IS IN THE "ON" POSITION POSSIBLE REASON 1. 2. 3. 4. Electrical socket is faulty or breaker has tripped. Voltage is inadequate. GFCI has tripped. Power cord is not plugged in. POSSIBLE SOLUTION 1. 2. 3. 4. Check plug, socket, fuses, breaker. Check that the voltage is adequate. Reset/Try another electrical outlet. Plug in power cord.
SAFETY & WARNING INSTRUCTIONS WARNING WARNING When an extension cable is required, you must ensure that it has the right ampere rating for your pressure cleaner and is in safe electrical condition. • Never use the pressure cleaner to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc. • Always prevent debris from being WARNING • When using the pressure cleaner, use safety equipment including protective clothing and safety goggles.
OPERATING INSTRUCTIONS Using the Rotary Brush CAUTION The rotary brush is used with the trigger gun. Push the brush onto the trigger gun nozzle and turn clockwise to lock as you would for the lance. (Fig. 6) The brush may be used for washing cars, boats, windows and other similar items. The rotary brush operates at open orifice pressure so that it will not direct a stream of water. (Fig.
OPERATING OPERATING INSTRUCTIONS INSTRUCTIONS Suitable Use of Your Pressure Washer Unpacking Your Pressure Washer This high pressure washer is suitable for non-professional use. The working temperature must range between 40°F and 120 °F. The machine is supplied with a trigger gun, equipped with a trigger handle to offer a comfortable working position. The high pressure washer is suitable for washing with cold water only.
