Quick Installation Guide

3) External device connection diagram
Installation Diagram（two models）
4
Wall bracket
Desktop bracket（Buy independently）
Model 1. Wall-mounted Installation
Step 1. Install wall bracket
Without 86 embedded box in the wall
A. According to the position of the cable in the wall, dig out a square hole
(height*width*depth=58.5*60*50mm) that can accommodate all cables.
B. Align the square hole of the wall bracket with the hole digged out before,
then mark the two fixation holes through bracket on the wall.
C. Take down the bracket, using an electric drill to make the two fixation holes
on the wall,then insert the two screw fixing seats provided.
D. Fix the wall bracket on the wall with two TA4*30 screws.
A
B
C D
TA4*30mm Screw