User's Manual

100
off, on is always red bright, the default is off.
Ringing
Power lamp status when there is an incoming
call, including off/on/slow flash/quick flash,
default flash.
Mute
Power lamp status in mute mode, including
off/on/slow flash/quick flash, off by default.
Hold/Held
The power lamp state, including off/on/slow
flash/quick flash, is turned off by default when
left/retained.
Notification Popups
Display Missed Call Popup
No incoming call popup prompt after opening, no
popup prompt when closing, open by default.
Display MWI Popup
Voice message popup prompt is not answered
after opening, and it is opened by default if there
is no popup prompt when closing.
Display Device Connect Popup
There is a popup prompt when the WIFI adapter
is connected. There is no popup prompt when
the WIFI adapter is closed. It is on by default.
Display SMS Popup
There is popup prompt for unread messages
after opening, and there is no popup prompt
when closing. It is opened by default.
Display Other Popup
When the handle is not hung back after opening,
registration fails, IP acquisition fails, Tr069
connection fails and other abnormalities, there
will be popup prompt when it is opened;
otherwise, there will be no prompt when it is
closed, and it will be opened by default.
Figure 1
11.18 Settings >> Media Settings
Change voice Settings.
Table 26 - Voice settings
Parameter
Description
Codecs Settings
Select enable or disable voice encoding:
G.711A/U,G.722,G.729,