User's Manual

102
11.19 Settings >> MCAST
This feature allows user to make some kind of broadcast call to people who are in
multicast group. User can configure a multicast DSS Key on the phone, which allows
user to send a Real Time Transport Protocol (RTP) stream to the pre-configured
multicast address without involving SIP signaling. You can also configure the phone to
receive an RTP stream from pre-configured multicast listening address without involving
SIP signaling. You can specify up to 10 multicast listening addresses.
Table 27 - Multicast parameters
Parameters
Description
Normal Call Priority
Define the priority of the active call, 1 is the
highest priority, 10 is the lowest.
Enable Page Priority
The voice call in progress shall take precedence
over all incoming paging calls.
Name
Listened multicast server name
Host: port
Listened multicast server’s multicast IP address
and port.
11.20 Settings >> Action
Action URL
Note! Action urls are used for IPPBX systems to submit phone events. Please refer
to Fanvil Action URL for details.
11.21 Settings >> Time/Date
The user can configure the time Settings of the phone on this page.
。
Table 28 – Time & Date settings
Parameters
Description
Network Time Server Settings
Time Synchronized via SNTP
Enable time-sync through SNTP protocol
Time Synchronized via DHCP
Enable time-sync through DHCP protocol
Primary Time Server
Set primary time server address