User's Manual

27
8 Basic Function
8.1 Making Phone Calls
 Default Line
The equipment provides 6 SIP line services. If all the 6 lines are configured successfully,
the user can use any line to make or receive calls. If the user has set a default line, the
number or name currently used by default will be displayed in the upper left corner of the
screen interface. To enable or disable the default line function, the user can go through
[Menu] >> [Function] >> [Basic Settings] >> [General] or complete the settings on the
web page ([Web Page] >> [Settings] >> [Function Settings] 】 >>【Basic Settings】).
 Dialing Methods
User can dial a number by:
 Entering the number directly
 Selecting a phone number from phonebook contacts (Refer to 10.2.1 Local
contacts)
 Selecting a phone number from cloud phonebook contacts (Refer to 10.2.3
Cloud Phone Book)
 Selecting a phone number from call logs (Refer to 10.3 Call Log)
 Redialing the last dialed number
 Press the management center button to call
v
Picture 12- Dial interface
When calling a number, the user can press [End] or press the return button to