User's Manual

43
Table 15- SIP hotspot Parameters
Parameters
Description
Device Table
If your phone is set to “SIP hotspot server”, Device Table will display as Client
Device Table which connected to your phone.
If your phone is set to “SIP hotspot client”, Device Table will display as Server
Device Table which you can connect to.
SIP hotspot
Enable hotspot
Set it to be Enable to enable the feature.
Mode
Choose hotspot, phone will be a “SIP hotspot server”; Choose Client, phone
will be a “SIP hotspot Client”
Monitor Type
Either the Multicast or Broadcast is ok. If you want to limit the broadcast
packets, you’d better use broadcast. But, if client choose broadcast, the SIP
hotspot phone must be broadcast.
Monitor Address
The address of broadcast, hotspot server and hotspot client must be same.
Remote Port
Type the Remote port number.
Configure SIP hotspot server:
Picture 37- SIP hotspot server configuration
Configure SIP hotspot client:
As a SIP hotspot client, no SIP account needs to be set. The Phone set will automatically
obtain and be configured a SIP account. On the SIP Hotspot tab page, set Mode to Client.
The values of other options are the same as those of the hotspot.