User's Manual

63
10.5.2
AP setting
In the absence of a wired network, you can set up a wireless network connection by
turning on the AP mode of the device and connecting to the backstage webpage of the
device with a mobile phone.
Press menu button [Menu] >> [Basic Settings] button.
Click [Basic Settings] >> [WLAN] >> [AP Settings]
Enable AP, prompt to restart, it will take effect after restart (cannot be turned on at the
same time as the wireless network, if the wireless network is enabled, you need to turn it
off)
After restarting, enter the AP setting interface, you can see the SSID and IP address
named after the device's MAC address
Picture 61- AP info
Turn on Wi-Fi, you can see the Wi-Fi network named by the device's MAC address, click
to connect without a password