User's Manual

76
Parameters
Description
Basic settings
CPE Serial Number
Display the device SN
Authentication Name
The user name of provision server
Authentication Password
The password of provision server
Configuration File
Encryption Key
If the device configuration file is encrypted , user should add
the encryption key here
General Configuration File
Encryption Key
If the common configuration file is encrypted, user should add
the encryption key here
Download Fail Check
Times
If there download is failed, phone will retry with the configured
times.
Update Contact Interval
Phone will update the phonebook with the configured interval
time. If it is 0, the feature is disabled.
Save Auto Provision
Information
Save the HTTP/HTTPS/FTP user name and password. If the
provision URL is kept, the information will be kept.
Download Common
Config enabled
Whether phone will download the common configuration file.
Enable Server Digest
When the feature is enable, if the configuration of server is
changed, phone will download and update.
DHCP Option
Option Value
Confiugre DHCP option, DHCP option supports DHCP custom
option | DHCP option 66 | DHCP option 43, 3 methods to get
the provision URL. The default is Option 66.
Custom Option Value
Custom Option value is allowed from 128 to 254. The option
value must be same as server define.
Enable DHCP Option 120
Use Option120 to get the SIP server address from DHCP
server.
SIP Plug and Play (PnP)
Enable SIP PnP
Whether enable PnP or not. If PnP is enable, phone will send
a SIP SUBSCRIBE message with broadcast method. Any
server can support the feature will respond and send a Notify
with URL to phone. Phone could get the configuration file with
the URL.
Server Address
Broadcast address. As default, it is 224.0.0.0.
Server Port
PnP port
Transport Protocol
PnP protocol, TCP or UDP.
Update Interval
PnP message interval.