User's Manual

89
Advanced Settings
Use Feature Code
When this setting is enabled, the features in this
section will not be handled by the device itself
but by the server instead. In order to control the
enabling of the features, the device will send
feature code to the server by dialing the number
specified in each feature code field.
Enable DND
Set the feature code to dial to the server
Disable DND
Set the feature code to dial to the server
Enable Call Forward Unconditional
Set the feature code to dial to the server
Disable Call Forward Unconditional
Set the feature code to dial to the server
Enable Call Forward on Busy
Set the feature code to dial to the server
Disable Call Forward on Busy
Set the feature code to dial to the server
Enable Call Forward on No Answer
Set the feature code to dial to the server
Disable Call Forward on No Answer
Set the feature code to dial to the server
Enable Blocking Anonymous Call
Set the feature code to dial to the server
Disable Blocking Anonymous Call
Set the feature code to dial to the server
Call Waiting On Code
Set the feature code to dial to the server
Call Waiting Off Code
Set the feature code to dial to the server
Send Anonymous On Code
Set the feature code to dial to the server
Send Anonymous Off Code
Set the feature code to dial to the server
SIP Encryption
Enable SIP encryption such that SIP
transmission will be encrypted
RTP Encryption
Enable RTP encryption such that RTP
transmission will be encrypted
Enable Session Timer
Set the line to enable call ending by session
timer refreshment. The call session will be
ended if there is not new session timer event
update received after the timeout period
Session Timeout
Set the session timer timeout period
Enable BLF List
Enable/Disable BLF List
BLF List Number
BLF List allows one BLF key to monitor the
status of a group. Multiple BLF lists are
supported.
Response Single Codec
If setting enabled, the device will use single
codec in response to an incoming call request
BLF Server
The registered server will receive the
subscription package from ordinary application