User's Manual

94
by commas, or a list of digits.
Destination
Set Destination address. This is for IP direct.
Port
Set the Signal port, and the default is 5060 for
SIP.
Alias
Set the Alias. This is the text to be added,
replaced or deleted. It is an optional item.
Note: There are four types of aliases.

all: xxx – xxx will replace the phone number.

add: xxx – xxx will be dialed before any phone number.

del –The characters will be deleted from the phone number.

rep: xxx – xxx will be substituted for the specified characters.
Suffix
Characters to be added at the end of the phone
number. It is an optional item.
Length
Set the number of characters to be deleted. For
example, if this is set to 3, the phone will delete
the first 3 digits of the phone number. It is an
optional item.
This feature allows the user to create rules to make dialing easier. There are several
different options for dialing rules. The examples below will show how this can be used.
Example 1: All Substitution -- Assume that it is desired to place a direct IP call to IP
address 172.168.2.208. Using this feature, 123 can be substituted for 172.168.2.208.
Picture 86- Dial rules table (1)
Example 2: Partial Substitution -- To dial a long distance call to Beijing requires dialing
area code 010 before the local phone number. Using this feature 1 can be substituted
for 010. For example, to call 62213123 would only require dialing 162213123 instead of
01062213123.