User's Manual

98
Push XML Server
Configure the Push XML Server, when phone
receives request, it will determine whether to
display corresponding content on the phone
which sent by the specified server or not.
Enable Pre-Dial
Disable this feature, user enter number will open
audio channel automatically.
Enable the feature, user enter the number
without opening audio channel.
Enable Multi Line
If enabled, up to 10 simultaneous calls can exist
on the phone, and if disabled, up to 2
simultaneous calls can exist on the phone.
Line Display Format
Custom line format：SIPn/SIPn：xxx/xxx@SIPn
Contact As White List Type
NONE/BOTH/DND White List/FWD White List
Block XML When Call
Disable XML push on call.
SIP notify
When enabled, the phone displays the
information when it receives the relevant notify
content.
Tone Settings
Enable Holding Tone
When turned on, a tone plays when the call is
held
Enable Call Waiting Tone
When turned on, a tone plays when call waiting
Play Dialing DTMF Tone
Play DTMF tone on the device when user
pressed a phone digits at dialing, default
enabled.
Play Talking DTMF Tone
Play DTMF tone on the device when user
pressed a phone digits during taking, default
enabled.
DND Settings
DND Option
Select to take effect on the line or on the phone
or close.
Enable DND Timer
Enable DND Timer, If enabled, the DND is
automatically turned on from the start time to the
off time.
DND Start Time
Set DND Start Time
DND End Time
Set DND End Time
Intercom Settings
Enable Intercom
When intercom is enabled, the device will accept