User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3Safety Instruction
- 4Overview
- 5Desktop Installation
- 6Appendix Table
- 7Introduction to the User
- 8Basic Function
- 9Advance Function
- 10Phone Settings
- 11Web Configurations
- 12Network >> Basic
- 12.1Network >> Service Port
- 12.2Network >> VPN
- 12.3Network >> Advanced
- 12.4Line >> SIP
- 12.5Line >> SIP Hotspot
- 12.6Line >> Dial Plan
- 12.7Line >> Basic Settings
- 12.8Line >> RTCP-XR
- 12.9Phone settings >> Features
- 12.10Phone settings >> Media Settings
- 12.11Phone settings >> MCAST
- 12.12Phone settings >> Action
- 12.13Phone settings >> Time/Date
- 12.14Phone settings >> Tone
- 12.15Phone settings >> Advanced
- 12.16Phonebook >> Contact
- 12.17Phonebook >> Cloud phonebook
- 12.18Phonebook >> Call List
- 12.19Phonebook >> Web Dial
- 12.20Phonebook >> Advanced
- 12.21Call Log
- 12.22Function Key >> Function Key
- 12.23Function Key >> Side Key
- 12.24Function Key >> Softkey
- 12.25Function Key >> Advanced
- 12.26Application >> Manage Recording
- 12.27Security >> Web Filter
- 12.28Security >> Trust Certificates
- 12.29Security >> Device Certificates
- 12.30Security >> Firewall
- 12.31Device Log >> Device Log
- 13Trouble Shooting
108
/
125
LDAP Search
Select from with one LDAP for search
Emergency Call Number
Configure the Emergency Call Number. Despite the keyboard is locked,
you can dial the emergency call number
Restrict Active URI Source IP
Set the device to accept Active URI command from specific IP address.
More details please refer to this link
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba3641fe81a
5.pdf。
Push XML Server
Configure the Push XML Server, when phone receives request, it will
determine whether to display corresponding content on the phone which
sent by the specified server or not.
Enable Pre-Dial
Disable this feature, user enter number will open audio channel
automatically.
Enable the feature, user enter the number without opening audio channel.
Enable Multi Line
If enabled, up to 10 simultaneous calls can exist on the phone, and if
disabled, up to 2 simultaneous calls can exist on the phone.
Line Display Format
Custom line format：SIPn/SIPn：xxx/xxx@SIPn
Contact As White List Type
NONE/BOTH/DND White List/FWD White List
Block XML When Call
Disable XML push on call.
SIP notify
When enabled, the phone displays the information when it receives the
relevant notify content.
Tone Settings
Enable Holding Tone
When turned on, a tone plays when the call is held
Enable Call Waiting Tone
When turned on, a tone plays when call waiting
Play Dialing DTMF Tone
Play DTMF tone on the device when user pressed a phone digits at
dialing, default enabled.
Play Talking DTMF Tone
Play DTMF tone on the device when user pressed a phone digits during
taking, default enabled.
DND Settings
DND Option
Select to take effect on the line or on the phone or close.
Enable DND Timer
Enable DND Timer, If enabled, the DND is automatically turned on from
the start time to the off time.
DND Start Time
Set DND Start Time
DND End Time
Set DND End Time
Intercom Settings
Enable Intercom
When intercom is enabled, the device will accept the incoming call
request with a SIP header of Alert-Info instruction to automatically answer
the call after specific delay.
Enable Intercom Mute
Enable mute mode during the intercom call