User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3Safety Instruction
- 4Overview
- 5Desktop Installation
- 6Appendix Table
- 7Introduction to the User
- 8Basic Function
- 9Advance Function
- 10Phone Settings
- 11Web Configurations
- 12Network >> Basic
- 12.1Network >> Service Port
- 12.2Network >> VPN
- 12.3Network >> Advanced
- 12.4Line >> SIP
- 12.5Line >> SIP Hotspot
- 12.6Line >> Dial Plan
- 12.7Line >> Basic Settings
- 12.8Line >> RTCP-XR
- 12.9Phone settings >> Features
- 12.10Phone settings >> Media Settings
- 12.11Phone settings >> MCAST
- 12.12Phone settings >> Action
- 12.13Phone settings >> Time/Date
- 12.14Phone settings >> Tone
- 12.15Phone settings >> Advanced
- 12.16Phonebook >> Contact
- 12.17Phonebook >> Cloud phonebook
- 12.18Phonebook >> Call List
- 12.19Phonebook >> Web Dial
- 12.20Phonebook >> Advanced
- 12.21Call Log
- 12.22Function Key >> Function Key
- 12.23Function Key >> Side Key
- 12.24Function Key >> Softkey
- 12.25Function Key >> Advanced
- 12.26Application >> Manage Recording
- 12.27Security >> Web Filter
- 12.28Security >> Trust Certificates
- 12.29Security >> Device Certificates
- 12.30Security >> Firewall
- 12.31Device Log >> Device Log
- 13Trouble Shooting
109
/
125
Enable Intercom Tone
If the incoming call is intercom call, the phone plays the intercom tone
Enable Intercom Barge
Enable Intercom Barge by selecting it, the phone auto answers the
intercom call during a call. If the current call is intercom call, the phone will
reject the second intercom call
Response Code Settings
DND Response Code
Set the SIP response code on call rejection on DND
Busy Response Code
Set the SIP response code on line busy
Reject Response Code
Set the SIP response code on call rejection
Password Dial Settings
Enable Password Dial
Enable Password Dial by selecting it, When number entered is beginning
with the password prefix, the following N numbers after the password
prefix will be hidden as *, N stand for the value which you enter in the
Password Length field. For example: you set the password prefix is 3,
enter the Password Length is 2, then you enter the number 34567, it will
display 3**67 on the phone.
Encryption Number Length
Configure the Encryption Number length
Password Dial Prefix
Configure the prefix of the password call number
Power LED
Common
Standby power lamp state, off when off, open is always bright red. Off by
default.
SMS/MWI
The status of power lamp when there is unread short message/voice
message, including off/on/slow flash/quick flash, default slow flash.
Missed
The state of the power lamp when there is a missed call, including
off/on/slow flash/quick flash, the default slow flash.
Talk/Dial
In the talk/dial state, the power lamp state, off is off, on is always red
bright, the default is off.
Ringing
Power lamp status when there is an incoming call, including off/on/slow
flash/quick flash, default flash.
Mute
Power lamp status in mute mode, including off/on/slow flash/quick flash,
off by default.
Hold/Held
The power lamp state, including off/on/slow flash/quick flash, is turned off
by default when left/retained.
Notification Popups
Display Missed Call Popup
No incoming call popup prompt after opening, no popup prompt when
closing, open by default.
Display MWI Popup
Voice message popup prompt is not answered after opening, and it is
opened by default if there is no popup prompt when closing.
Display Device Connect
There is a popup prompt when the WIFI adapter is connected. There is no