User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3Safety Instruction
- 4Overview
- 5Desktop Installation
- 6Appendix Table
- 7Introduction to the User
- 8Basic Function
- 9Advance Function
- 10Phone Settings
- 11Web Configurations
- 12Network >> Basic
- 12.1Network >> Service Port
- 12.2Network >> VPN
- 12.3Network >> Advanced
- 12.4Line >> SIP
- 12.5Line >> SIP Hotspot
- 12.6Line >> Dial Plan
- 12.7Line >> Basic Settings
- 12.8Line >> RTCP-XR
- 12.9Phone settings >> Features
- 12.10Phone settings >> Media Settings
- 12.11Phone settings >> MCAST
- 12.12Phone settings >> Action
- 12.13Phone settings >> Time/Date
- 12.14Phone settings >> Tone
- 12.15Phone settings >> Advanced
- 12.16Phonebook >> Contact
- 12.17Phonebook >> Cloud phonebook
- 12.18Phonebook >> Call List
- 12.19Phonebook >> Web Dial
- 12.20Phonebook >> Advanced
- 12.21Call Log
- 12.22Function Key >> Function Key
- 12.23Function Key >> Side Key
- 12.24Function Key >> Softkey
- 12.25Function Key >> Advanced
- 12.26Application >> Manage Recording
- 12.27Security >> Web Filter
- 12.28Security >> Trust Certificates
- 12.29Security >> Device Certificates
- 12.30Security >> Firewall
- 12.31Device Log >> Device Log
- 13Trouble Shooting
111
/
125
EHS Type
EHS headset is available after enabling.
RTP Control Protocol(RTCP) Settings
CNAME user
Set CNAME user
CNAME host
Set CNAME host
RTP Settings
RTP keep alive
Hold the call and send the packet after 30s
Alert Info Ring Settings
Value
Set the value to specify the ring type.
Ring Type
Type1-Type9
12.11 Phone settings >> MCAST
This feature allows user to make some kind of broadcast call to people who are in multicast group. User can
configure a multicast DSS Key on the phone, which allows user to send a Real Time Transport Protocol (RTP)
stream to the pre-configured multicast address without involving SIP signaling. You can also configure the
phone to receive an RTP stream from pre-configured multicast listening address without involving SIP
signaling. You can specify up to 10 multicast listening addresses.
Table 27 - Multicast parameters
Parameters
Description
Normal Call Priority
Define the priority of the active call, 1 is the highest priority, 10 is the lowest.
Enable Page Priority
The voice call in progress shall take precedence over all incoming paging calls.
Name
Listened multicast server name
Host: port
Listened multicast server’s multicast IP address and port.
12.12 Phone settings >> Action
Action URL
Note! Action urls are used for IPPBX systems to submit phone events.
12.13 Phone settings >> Time/Date
The user can configure the time Settings of the phone on this page.
Table 28 - Time&Date settings
Parameters
Description
Network Time Server Settings
Time Synchronized via SNTP
Enable time-sync through SNTP protocol
Time Synchronized via DHCP
Enable time-sync through DHCP protocol