User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3Safety Instruction
- 4Overview
- 5Desktop Installation
- 6Appendix Table
- 7Introduction to the User
- 8Basic Function
- 9Advance Function
- 10Phone Settings
- 11Web Configurations
- 12Network >> Basic
- 12.1Network >> Service Port
- 12.2Network >> VPN
- 12.3Network >> Advanced
- 12.4Line >> SIP
- 12.5Line >> SIP Hotspot
- 12.6Line >> Dial Plan
- 12.7Line >> Basic Settings
- 12.8Line >> RTCP-XR
- 12.9Phone settings >> Features
- 12.10Phone settings >> Media Settings
- 12.11Phone settings >> MCAST
- 12.12Phone settings >> Action
- 12.13Phone settings >> Time/Date
- 12.14Phone settings >> Tone
- 12.15Phone settings >> Advanced
- 12.16Phonebook >> Contact
- 12.17Phonebook >> Cloud phonebook
- 12.18Phonebook >> Call List
- 12.19Phonebook >> Web Dial
- 12.20Phonebook >> Advanced
- 12.21Call Log
- 12.22Function Key >> Function Key
- 12.23Function Key >> Side Key
- 12.24Function Key >> Softkey
- 12.25Function Key >> Advanced
- 12.26Application >> Manage Recording
- 12.27Security >> Web Filter
- 12.28Security >> Trust Certificates
- 12.29Security >> Device Certificates
- 12.30Security >> Firewall
- 12.31Device Log >> Device Log
- 13Trouble Shooting
73
/
125
Picture 89 - Page screen Settings
10.1.3.2 Screen Saver
Press [Screen Settings] to find the [Screen protection] button, press [left] / [right] button to open/close
the screen protection, set the timeout time, the default is 15S, after completion, press [OK] button to
save.
After saving, return to standby mode and enter the screen saver after 15s, as follows:
Picture 90 - Phone screen saver
10.1.4 Ring
When the device is in the default standby mode,
Press soft-button [Menu] till you find the [Basic] item.
Enter [Basic] item till you find [Ring] item.
Enter [Ring] item and you will find [Headset] or [Handsfree] item, press left / right navigator keys to
adjust the ring volume, save the adjustment by pressing [OK] when done.
Enter [Ring type] item, press left / right navigator keys to change the ring type, save the adjustment by
pressing [OK] when done.
10.1.5 Voice Volume
When the device is in the default standby mode,
Press soft-button [Menu] till you find the [Basic] item.
Enter [Basic] item till you find [Voice Volume] item.
Enter [Voice Volume] item and you will find [Headset], [Handsfree] and [Headset] item.
Enter [Headset] or [Handsfree] or [Headset] item, press Left / Right navigator keys to adjust the audio