User Manual

25
/
42
Enable Session Timer
Set the line to enable call ending by session timer refreshment.
The call session will be ended if there is not new session timer
event update received after the timeout period
Session Timeout
Set the session timer timeout period
Enable Rport
Set the line to add rport in SIP headers
Enable PRACK
Set the line to support PRACK SIP message
Keep Authentication
Keep the authentication parameters from previous authentication
Auto TCP
Using TCP protocol to guarantee usability of transport for SIP
messages above 1500 bytes
Enable Feature Sync
Feature Sycn with server
Enable GRUU
Support Globally Routable User-Agent URI (GRUU)
BLF Server
The registered server will receive the subscription package from
ordinary application of BLF phone.
Please enter the BLF server, if the sever does not support
subscription package, the registered server and subscription
server will be separated.
BLF List Number
BLF List allows one BLF key to monitor the status of a group.
Multiple BLF lists are supported.
SIP Encryption
Enable SIP encryption such that SIP transmission will be
encrypted
SIP Encryption Key
Set the pass phrase for SIP encryption
RTP Encryption
Enable RTP encryption such that RTP transmission will be
encrypted
RTP Encryption Key
Set the pass phrase for RTP encryption
8.12 LINES / Dial Peer
This functionality offers you more flexible dial rule, you can refer to the following content to know how to
use this dial rule.
Table 2 - Dial Peer Settings for Lines on Web
Parameters
Description
Phone number
There are two types of matching: Full Matching or Prefix Matching. In Full
matching, the entire phone number is entered and then mapped per the
Dial Peer rules.
In prefix matching, only part of the number is entered followed by T. The
mapping with then take place whenever these digits are dialed. Prefix
mode supports a maximum of 30 digits.