User's Manual

7
K: Password mode,“K password # ”
B: Backspace Key, Enter the number and press B to
delete
8
MIC
Sound collecting
9
RFID area
Open the door with card
7.2 Quick Setting
Before proceeding with this step, make sure your Internet broadband connection is working
properly and connecting to the network hardware. The default factory mode of i33V&i33VF is
DHCP. IP address can be viewed by.
 Open the iDoorPhone Network Scanner. Press the Refresh button to search the device and
find the IP address.
（Download address http://download.fanvil.com/tool/iDoorPhoneNetworkScanner.exe）
Picture 2 - Quickly setting
 Long press DSS key for 10 seconds(after power-on for 30 seconds), and when the speaker
beeps rapidly, press DSS key again quickly, the beeps stop ,the intercom will report the IP
address by itself.
 In addition, device provides the device surface DSS key operation to switch IP address
acquisition mode:
Long press the DSS key for 10 seconds. When the speaker beeps, press the DSS key three
times, the beep stops. Wait for 10 seconds, then the system will broadcast the current IP
address automatically.
 Login to the device's WEB page for configuration setting according to the IP address:
 Configure the account, user name, server address and other parameters required for
registration provided by the service provider on the WEB configuration page;
7.3 WEB configuration
When the device and your computer are successfully connected to the network, enter the IP
address of the device on the browser as http://xxx.xxx.xxx.xxx/ and you can see the login
interface of the web page management.