User's Manual

9
7.5 Door opening operation
Unlock the door in the following eight ways:
1) Open the door with the local password, and press “K key + local door open password +#”
to open the door.
2) The access control helps to call owner, and the owner enters the remote opening
password to open the door.
3) The other device helps to call the door phone, enters the corresponding remote
authentication code, and opens the door after timeout or the password check length is
reached (the authentication code shall be configured in the access list, and the remote
telephone opening shall be enabled).
4) Open the door by swiping the RFID card, which supports IC card and ID card.
5) The door can be opened through the indoor door button when the door phone is in any
state.
6) Enter the position speed dial and authentication code to open the door, and directly enter
this authentication code to open the door in standby mode. Please refer to the access list
Settings for details.
7) In the case of door phone software exception, you can open the door through the super
administrator card and super administrator password (the password of super
administrator can only visit the devices with keyboard).
8) Open the door with active URL control command
The URL of openning door is http://user:pwd@host/cgi-bin/ConfigManApp.com?Key =
F_LOCK & code = openCode
A. user and PWD are user names and passwords for logging into the web
B. openCode is the remote door opening password, and the default is *
Example: http://admin:admin@172.18.3.25/cgi-bin/ConfigManApp.com?Key = *
Access code input correct play long sound prompt access and remote users, input
error through the low frequency short sound prompt.
Password input is prompted by high frequency long sound successful, input error is
prompted by high frequency short sound.
When the door lock is opened, it will be prompted by playing the long sound..