User's Manual

21
Check Times
downloaded 5 times.
Enable Server
Digest
When the feature is enable, if the configuration of server is changed,
phone will download and update.
DHCP Option
Option Value
The equipment supports configuration from Option 43, Option 66, or a
Custom DHCP option. It may also be disabled.
Custom Option
Value
Custom option number. Must be from 128 to 254.
Enable DHCP
Option 120
Set the SIP server address through DHCP option 120.
SIP Plug and Play (PnP)
Enable SIP PnP
Whether enable PnP or not. If PnP is enable, phone will send a SIP
SUBSCRIBE message with broadcast method. Any server supporting
for this special message will respond and send a Notify with URL to
phone. Phone could get the configuration file with the URL.
Server Address
Broadcast address. As default, it is 224.0.0.0.
Server Port
PnP port
Transport Protocol
PnP protocol, TCP or UDP.
Update Interval
PnP message interval.
Static Provisioning Server
Server Address
Set FTP/TFTP/HTTP server IP address for auto update. The address
can be an IP address or Domain name with subdirectory.
Configuration File
Name
The configuration file name. If it is empty, phone will request the
common file and device file which is named as its MAC address.
The file name could be a common name, $mac.cfg, $input.cfg. The
file format supports CFG/TXT/XML.
Protocol Type
Transferring protocol type ，supports FTP、TFTP、HTTP and HTTPS
Update Interval
Configuration file update interval time. As default it is 1, means phone
will check the update every 1 hour.
Update Mode
Provision Mode.
1. Disabled.
2. Update after reboot.
3. Update after interval.
TR069
Enable TR069
Enable TR069 after selection
Enable TR069
Warning Tone
If TR069 is enabled, there will be a prompt tone when connecting.