User's Manual

Picture 17 - System Tools

Syslog：When enabled, set the syslog software address, and log information of the device will

be recorded in the syslog software during operation. If there is any problem, log information can

be analyzed by Fanvil technical support.

Auto Reboot Setting:

Reboot Mode:

Disable：It will not restart at set time after disabled

Fixed Time：In the range of 0~24 (h), restart will be conducted at the setting point every day

after the setting is completed

Uptime：Set the maximum length to 3 bits and restart at run time

For other details, please refer to 10 trouble shooting

10.9Network >> Basic

This page allows users to configure network connection types and parameters.