Config Guide

64

After the phone set registers with the BroadSoft server, a server type needs to
be set. Specifically, log in to the webpage of the phone set,
choose [Line] >> [SIP] >> [Advanced Settings] and set Specific Server Type
to BroadSoft, as shown in the following figure.
Picture 75 - Set BroadSoft server

If a Fanvil phone set needs to use the SCA function, enable it for the phone set.
Specifically, log in to the webpage of the phone set,
choose [Line] >> [SIP] >> [Advanced Settings], and select Enable SCA. If
SCA is not enabled, the registered line is private line.
Picture 76 - Enable SCA
After an account is configured and successfully registered, you can configure lines
whose DSS Key is Shared Call Appearance on the Function Key page to facilitate
viewing the call status of the group. Each line key represents a call appearance.