Config Guide

74
Table 14 - Time Settings Parameters
Parameters
Description
Mode
Auto/Manual
Auto: Enable network time synchronization via SNTP protocol,
default enabled.
Manual: User can modify data manually.
SNTP Server
SNTP server address
Time zone
Select the time zone
Time format
Select time format from one of the followings:
 1 JAN, MON
 1 January, Monday
 JAN 1, MON
 January 1, Monday
 MON, 1 JAN
 Monday, 1 January
 MON, JAN 1
 Monday, January 1
 DD-MM-YY
 DD-MM-YYYY
 MM-DD-YY
 MM-DD-YYYY
 YY-MM-DD
 YYYY-MM-DD
Separator
Choose the separator between year and moth and day
12-Hour Clock
Display the clock in 12-hour format
Daylight Saving Time
Enable or Disable the Daylight Saving Time
11.1.3 Screen
The user can set the phone screen parameters through both of the phone interface and
web interface.

Phone end: When the phone is in the default standby state, go to [Menu] >>
[Basic] >> [Screen Settings] to edit the screen parameters. After editing, click [OK]
to save, as shown in the figure: