Config Guide

95
Once the VPN is configured, the device will try to connect with the VPN automatically
when the device boots up every time until user disable it. Sometimes, if the VPN
connection does not establish immediately, user may try to reboot the device and check
if VPN connection established after reboot.

OpenVPN
To establish an OpenVPN connection, user should get the following authentication and
configuration files from the OpenVPN hosting provider and name them as the following,
OpenVPN Configuration file: client.ovpn
CA Root Certification: ca.crt
Client Certification: client.crt
Client Key: client.key
User then upload these files to the device in the web page [Network] >> [VPN], select
OpenVPN Files. Then user should check “Enable VPN” and select “OpenVPN” in VPN
Mode and click “Apply” to enable OpenVPN connection.
Same as L2TP connection, the connection will be established every time when system
rebooted until user disable it manually.
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba38303bfcf0.pdf
11.7.2.4 Web Server Type
Configure the Web Server mode to be HTTP or HTTPS and will be activated after the
reboot. Then user could use http/https protocol to access pone web page.
Picture 119 - The phone configures the web server type
11.7.3 Set The Secret Key
When the device is in the default standby mode,