Config Guide

102
Upgrade Server Address2
Set available upgrade server address.
Update Interval
Set Update Interval.
Firmware Information
Current Software Version
It will show Current Software Version.
Server Firmware Version
It will show Server Firmware Version.
[Upgrade] button
If there is a new version txt and new software firmware
on the server, the page will display version information
and upgrade button will become available; Click
[Upgrade] button to upgrade the new firmware.
New version description
information
When there is a corresponding TXT file and version on
the server side, the TXT and version information will be
displayed under the new version description information.
 The file requested from the server is a TXT file called vendor_model_hw10.txt.Hw
followed by the hardware version number, it will be written as hw10 if no difference
on hardware. All Spaces in the filename are replaced by underline.
 The URL requested by the phone is HTTP:// server address/vendor_Model_hw10
.txt ： The new version and the requested file should be placed in the download
directory of the HTTP server, as shown in the figure:

TXT file format must be UTF-8

vendor_model_hw10.TXT The file format is as follows：
Version=1.6.3 #Firmware
Firmware=xxx/xxx.z #URL，Relative paths are supported and absolute paths are
possible, distinguished by the presence of protocol headers.
BuildTime=2018.09.11 20:00
Info=TXT|XML
Xxxxx
Xxxxx
Xxxxx
Xxxxx
 After the interval of update cycle arrives, if the server has available files and