Config Guide

119
Emergency Call Number
Search path
Select the search path.
LDAP Search
Select from with one LDAP for search
Emergency Call Number
Configure the Emergency Call Number. Despite the keyboard is
locked, you can dial the emergency call number
Restrict Active URI Source IP
Set the device to accept Active URI command from specific IP
address. More details please refer to this link
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba3
641fe81a5.pdf。
Push XML Server
Configure the Push XML Server, when phone receives request, it
will determine whether to display corresponding content on the
phone which sent by the specified server or not.
Enable Pre-Dial
Disable this feature, user enter number will open audio
channel automatically.
Enable the feature, user enter the number without opening audio
channel.
Enable Multi Line
If enabled, up to 10 simultaneous calls can exist on the phone,
and if disabled, up to 2 simultaneous calls can exist on the phone.
Line Display Format
Custom line format：SIPn/SIPn：xxx/xxx@SIPn
Contact As White List Type
NONE/BOTH/DND White List/FWD White List
Block XML When Call
Disable XML push on call.
SIP notify
When enabled, the phone displays the information when it
receives the relevant notify content.
Tone Settings
Enable Holding Tone
When turned on, a tone plays when the call is held
Enable Call Waiting Tone
When turned on, a tone plays when call waiting
Play Dialing DTMF Tone
Play DTMF tone on the device when user pressed a phone digits
at dialing, default enabled.
Play Talking DTMF Tone
Play DTMF tone on the device when user pressed a phone digits
during taking, default enabled.
DND Settings
DND Option
Select to take effect on the line or on the phone or close.
Enable DND Timer
Enable DND Timer, If enabled, the DND is automatically turned
on from the start time to the off time.
DND Start Time
Set DND Start Time
DND End Time
Set DND End Time
Intercom Settings
Enable Intercom
When intercom is enabled, the device will accept the incoming