Config Guide

125

Enable Energy Saving

Backlight Time

LCD Menu Password Settings.
The password is 123 by default.

Keyboard Lock Settings.

Configure Greeting Words
The greeting message will display on the top left corner of the LCD when the device is
idle, which is limited to 16 characters. The default chars are ‘VOIP PHONE’.
13.17 Phonebook >> Contact
User can add, delete, or edit contacts in the phonebook in this page. User can browse
the phonebook and sorting it by name, phones, or filter them out by group.
To add a new contact, user should enter contact’s information and press “Add” button to
add it.
To edit a contact, click on the checkbox in front of the contact, the contact information will
be copied to the contact edit boxes, press “Modify” button after finished editing.
To delete one or multiple contacts, check on the checkbox in front of the contacts wished
to be deleted and click the “Delete” button, or click the “Clear” button with selecting any
contacts to clear the phonebook.
User can also add multiple contacts into a group by selecting the group in the dropdown
options in front of “Add to Group” button at the bottom of the contact list, selecting
contacts with checkbox and click “Add to Group” to add selected contacts into the group.
Similarly, user can select multiple users and add them into blacklist by click “Add to
Blacklist” button.
13.18 Phonebook >> Cloud phonebook
Cloud Phonebook
User can configure up to 8 cloud phonebooks. Each cloud phonebook must be
configured with an URL where an XML phonebook is stored. The URL may be based on
HTTP/HTTPs or FTP protocol with or without authentication. If authentication is required,
user must configure the username and password.
To configure a cloud phonebook, the following information should be entered,