Config Guide

129
Table 29 - Function Key configuration
Parameters
Description
Memory Key
BLF (NEW CALL/BXFE /AXFER): It is used to prompt user the state of the
subscribe extension, and it can also pick up the subscribed number, which help
user monitor the state of subscribe extension (idle, ringing, a call). There are 3
types for one-touch BLF transfer method.
p.s. User should enter the pick-up number for specific BLF key to fulfill the
pick-up operation.
Presence: Compared to BLF, the Presence is also able to view whether the
user is online.
Note: You cannot subscribe the same number for BLF and Presence at the
same time
Speed Dial: You can call the number directly which you set. This feature is
convenient for you to dial the number which you frequently dialed.
Intercom: This feature allows the operator or the secretary to connect the
phone quickly; it is widely used in office environments.
Line
It can be configured as a Line Key. User is able to make a call by pressing Line
Key.
Key Event
User can select a key event as a shortcut to trigger.
For example: MWI / DND / Release / Headset / Hold / etc.
DTMF
It allows user to dial or edit dial number easily.
URL
Open the specific URL directly.
Multicast
Configure the multicast address and audio codec. User presses the key to
initiate the multicast.
Action URL
The user can use a specific URL to make basic calls to the phone.
XML browser
Users can set the DSS Key for specific URL download and other operations.
13.24 Function Key >> Side Key
Side Key function and settings please refer to 12.23 Function Key。
13.25 Function Key >> Softkey
The User Settings mode and display style, display page.
Table 30 - Softkey configuration