Config Guide

62
Mute
Enable Intercom
Tone
If the incoming call is intercom call, the phone plays the intercom tone
Enable Intercom
Barge
Enable Intercom Barge by selecting it, the phone auto answers the intercom
call during a call. If the current call is intercom call, the phone will reject the
second intercom call
10.6 MCAST
This feature allows user to make some kind of broadcast call to people who are in
multicast group. User can configure a multicast DSS Key on the phone, which allows
user to send a Real Time Transport Protocol (RTP) stream to the pre-configured
multicast address without involving SIP signaling. You can also configure the phone to
receive an RTP stream from pre-configured multicast listening address without involving
SIP signaling. You can specify up to 10 multicast listening addresses.
Picture 73 - Multicast Settings Page
Table 11 - MCAST Parameters on Web
Parameters
Description
Normal Call Priority
Define the priority of the active call, 1 is the highest priority, 10 is the
lowest.
Enable Page Priority
The voice call in progress shall take precedence over all incoming
paging calls.
Name
Listened multicast server name