V1.0 X6U Quick Installation Guide Fanvil Technology Co., Ltd www.fanvil.
Packaging list Handset Cord IP Phone Handset Ethernet Cable Stand Quick Installation Guide Power Adapter Wall Stand (Optional) (Buy separately) Screen icon In hands-free mode New SMS Dialed call(s) New VM messages Internet connected Do not disturb Voice quality level of Internet is activated (Red) call disconnected Mute activated SIP hotspot activated Keypad locked No IP address Silent mode VLAN activated Forward call(s) Call is on hold VPN activated Missed call(s) Auto-answe
Installation the device Please follow the instructions in below picture to install the device. Bracket desktop installation Wall mounting (wall stand need buy separately) Configuration Configuration via LCD menu of phone 1．Press Menu > System (default password 123) 2．Select Network: To configure the Network Settings (IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE). 3．Select Accounts: To configure enable the account, fill the SIP server address, port, user name, password etc. 4．Save the configuration.
Call transfer Bluetooth Attended transfer: 1．Press key or Xfer soft key during the active conversation, the call is put on hold. 2．Dial the second telephone number. 3．When the call is answered, then press key or Xfer soft key to complete the operation. Blind transfer: 1．Press key or Xfer soft key during the active conversation, the call will be on hold. key or Xfer 2．Then enter the 2nd telephone number and press soft key. Call forward 1．Press Menu > Features > Call Forward.
Regulatory Compliance Federal Communication Commission (FCC) — USA This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
