User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3CE Declaration of Conformity
- 4FCC Statement
- 5Safety Instruction
- 6Overview
- 7Desktop Installation
- 8Appendix Table
- 9Introduction to the User
- 10Basic Function
- 11Advance Function
- 12Phone Settings
- 13Web Configurations
- 14Network >> Basic
- 14.1Network >> Service Port
- 14.2Network >> VPN
- 14.3Network >> Advanced
- 14.4Line >> SIP
- 14.5Line >> SIP Hotspot
- 14.6Line >> Dial Plan
- 14.7Line >> Action Plan
- 14.8Line >> Basic Settings
- 14.9Line >> RTCP-XR
- 14.10Phone settings >> Features
- 14.11Phone settings >> Media Settings
- 14.12Phone settings >> MCAST
- 14.13Phone settings >> Action
- 14.14Phone settings >> Time/Date
- 14.15Phone settings >> Tone
- 14.16Phone settings >> Advanced
- 14.17Phonebook >> Contact
- 14.18Phonebook >> Cloud phonebook
- 14.19Phonebook >> Call List
- 14.20Phonebook >> Web Dial
- 14.21Phonebook >> Advanced
- 14.22Call Log
- 14.23Function Key >> Function Key
- 14.24Function Key >> Side Key
- 14.25Function Key >> Softkey
- 14.26Function Key >> Advanced
- 14.27Application >> Manage Recording
- 14.28Security >> Web Filter
- 14.29Security >> Trust Certificates
- 14.30Security >> Device Certificates
- 14.31Security >> Firewall
- 14.32Device Log >> Device Log
- 15Trouble Shooting
74
and upgrade button will become available; Click
[Upgrade] button to upgrade the new firmware.
New version description
information
When there is a corresponding TXT file and version on
the server side, the TXT and version information will be
displayed under the new version description information.
The file requested from the server is a TXT file called vendor_model_hw10.txt.Hw
followed by the hardware version number, it will be written as hw10 if no difference
on hardware. All Spaces in the filename are replaced by underline.
The URL requested by the phone is HTTP:// server address/vendor_Model_hw10
.txt ： The new version and the requested file should be placed in the download
directory of the HTTP server, as shown in the figure:
TXT file format must be UTF-8
vendor_model_hw10.TXT The file format is as follows：
Version=1.6.3 #Firmware
Firmware=xxx/xxx.z #URL，Relative paths are supported and absolute paths are
possible, distinguished by the presence of protocol headers.
BuildTime=2018.09.11 20:00
Info=TXT|XML
Xxxxx
Xxxxx
Xxxxx
Xxxxx
After the interval of update cycle arrives, if the server has available files and
versions, the phone will prompt as shown below. Click [view] to check the version
information and upgrade.