User's Manual

84
DNS Mode
Select DNS mode, A, SRV, NAPTR
Enable Long Contact
Allow more parameters in contact field per RFC
3840
Enable Strict Proxy
Enables the use of strict routing. When the
phone receives packets from the server，it will
use the source IP address, not the address in
via field.
Convert URI
Convert not digit and alphabet characters to
%hh hex code
Use Quote in Display Name
Whether to add quote in display name, i.e.
“Fanvil” vs Fanvil
Enable GRUU
Support Globally Routable User-Agent URI
(GRUU)
Sync Clock Time
Time Sync with server
Enable Inactive Hold
With the post-call hold capture package
enabled, you can see that in the INVITE
package, SDP is inactive.
Caller ID Header
Set the Caller ID Header
Use 182 Response for Call waiting
Set the device to use 182 response code at call
waiting response
Enable Feature Sync
Feature Sync with server
Enable SCA
Enable/Disable SCA (Shared Call Appearance )
CallPark Number
Set the CallPark number.
Server Expire
Set the timeout to use the server.
TLS Version
Choose TLS Version.
uaCSTA Number
Set uaCSTA Number.
Enable Click To Talk
With the use of special server, click to call out
directly after enabling.
Flash mode
Chose Flash mode，normal or SIP info.
Flash Info Content-Type
Set the SIP info content type.
Flash Info Content-Body
Set the SIP info content body.
PickUp Number
Set the scramble number when the Pickup is
enabled.
JoinCall Number
Set JoinCall Number.
Intercom Number
Set Intercom Number.
Unregister On Boot
Whether to enable logout function.
Enable MAC Header
When opening the registration, are IP package
and user agent with MAC.