User's Manual

89
User Agent
Set user agent information
14.8 Line >> Basic Settings
Set up the register global configuration.
Table 24 - Set the line global configuration on the web page
Parameters
Description
STUN Settings
Server Address
Set the STUN server address
Server Port
Set the STUN server port, default is 3478
Binding Period
Set the STUN binding period which can be used
to keep the NAT pinhole opened.
SIP Waiting Time
Set the timeout of STUN binding before sending
SIP messages
The TLS authentication
TLS Certification File
Upload or delete the TLS certification file used
for encrypted SIP transmission.
14.9 Line >> RTCP-XR
RTCP-XR mode is based on RFC3611 (RTP Control Extended Report), which can
measure and evaluate network packet loss, delay and voice quality by sending
RTCP-XR packets.
Table 25 - VQ RTCP-XR Settings
Parameters
Description
VQ RTCP-XR Settings
VQ RTCP-XR Session Report
VQ report on whether session mode is enabled or
not.
VQ RTCP-XR Interval Report
Whether to turn on Interval mode for VQ report
sending.
Period for Interval Report(5~99)
The time interval at which VQ reports are sent
periodically.
Warning threshold for Moslq(15~40)
When the phone calculated the Moslq value x10
below the set threshold, a warning was issued.