User's Manual

90
Critical threshold for Moslq(15~40)
When the phone calculates the Moslq value x10
below the set threshold, the critical report is issued.
Warning Threshold for Delay(10~2000)
When the one-way delay of the phone is greater
than the set threshold, warning is issued.
Critical Threshold for Delay(10~2000)
When the phone computes that the one-way delay is
greater than the set threshold, the critical report is
issued.
Display Report Options on web
Whether to display the VQ report data for the last
call through the web page.
Note: the above functions are supported by X4U&X5U&X6U
14.10 Phone settings >> Features
Configuration phone features.
Table 26 - General function Settings
Parameters
Description
Basic Settings
Enable Call Waiting
Enable this setting to allow user to take second
incoming call during an established call. Default
enabled.
Enable Call Transfer
Enable Call Transfer.
Semi-Attended Transfer
Enable Semi-Attended Transfer by selecting it
Enable 3-Way Conference
Enable 3-way conference by selecting it
Enable Auto Onhook
The phone will hang up and return to the idle
automatically at hands-free mode
Auto Onhook Time
Specify Auto Onhook time, the phone will hang
up and return to the idle automatically after Auto
Hand down time at hands-free mode, and play
dial tone Auto Onhook time at handset mode
Ring for Headset
Enable Ring for Handset by selecting it, the
phone plays ring tone from handset.
Auto Headset
Enable this feature, headset plugged in the
phone, user press ‘answer’ key or line key to
answer a call with the headset automatically.
Enable Silent Mode
When enabled, the phone is muted, there is no
ringing when calls, you can use the volume keys